Real Estate Brides Grooms
 

Accommodation Available Hall size (25x20) for Rent basis. Interesting parties contact at M/s Om Property Dealer, Moh. Raghunath Pura, H.No. 104 Near S.M.G.S.Hospital Shalamar, Jammu........Send Mail

Accommodation Available
On rent basis for commercial use 5 big rooms, and 1 verandha, on Ist floor, separate entrance at Exchange Road, Near Kachi Chowni Chowk. Contact : T Singh Ph. R 543819 O 541626.....Send Mail

Plots for Sale
Life Time Opportunity Residential Plots available with in city all modern facilities. Plots of different size available in the Prime Locality of Bakshi Nagar Jammu For Details Contact : Tele No. 543888 upto 10.00 AM and 2.00 PM to 5.00 PM and Pager No. 9696/431847......Send Mail

Shop for Sale One shop for sale at K.C.'s Plaza with Double Cabin made on Architect design newly constructed (Broker Excuse). Contact : From 11 AM to 5 PM Phone 578499 Except Sunday......Send Mail

Plots for Sale 2, 8 marla plots for sale in Trikuta Nagar, Sector-1 Extension. Well located area already inhabited. Contact : Tele No. 461560 Time: 11 AM to 1 PM & 5 PM to 7 PM......Send Mail

Accommodation Vacant: Two Room, Kitchen, Bathroom on Rental Basis. Contact: Abhinav Gupta Morning: 10.30 A.M. to 12.30 P.M. Evening: 3.00 P.M. to 6.00 P.M. (7 B/B Gandhi Nagar, Jammu.....Send Mail

House/Shops for Sale
A house C 3 shops on the main road of Shakti Nagar is for sale contact at Ph. No. 462975....Send Mail

House for Sale:
at Arjun - Nagar, H.No. 1/111 Main Chowk, Janipur Opp. State Bank of India 1. Four Bed Room 2. Three Bathroom 3. Drawing Room 4. Lobby 5. Kitchen Two 6. Store 7. Two Shop Contact : 540582....Send Mail

Plot for Sale: One 13 marla plot covered on all the four sides situated on truckable road behind Project Model School, Pamposh Colony, Sector 4, SBI lane Janipur, is available for sale. Genuine buyers are requested to contact telephone no 531919 for details....Send Mail

SALE & PURCHASE AND RENTING FOR SALE: Kothies, Shops, Plots, etc. Different part of Jammu City. FOR RENT Independent Kothies, 2,2 & 1 Bed Rooms State available at Gandhi Nagar, Shastri Nagar, Trikuta Nagar, Channi Himmat & Different part of Jammu city. PERSONS WHO WANT TO SELL/RENT OUT THEIR PROPERTIES: Contact: J.K. Properties 12 B/C (Opp. Sachdeva College). Gandhi Nagar, Ph: 455456....Send Mail

......Brides


Matrimonial:
Hindu Khatri parents seek CA, Computer/Electronics Engineer match for beautiful, famioy-oriented daughter, 35-years-old, Medical Doctor never married, Reply withi bio-data and photo 145, Harvestmoon Drive, Markham Ontario, Canada L3R 4M2.


Matrimonial: Looking for professional match age group 39-45, willing to settle in UK for North Indian Brahmin girl, 160 cms, in her late thirties look much younger, very pretty, very fair of Indian values, own property in London. Send bio-data with photo, Mr Sharma 25, Reption Road, Harrow Middlessex HA3 90DUK


Matrimonial: San Francisco based well established North Indian Jain Parents seek alliance for cultured, sincere, atractive Daughter, 28/5' MS, Accounting CPAVegetarian Hindi speaking, w/good Indian values seeking Ambitious, Family Oriented Pprofessional preferably from California Respond w/biodata & photograph e-mail: jaipurgal@yahoo.com


Matrimonial: Suitable match for Sikh girl, 24/157, fair, Graduate in Nursing, green card holder, now living in USA, H1 vise preferred, E-mail: singhji@yahoo.com Delhi 110001


Matrimonial: Highly educated, tall, fair, handsome match for extremely beautiful, 27/162 cms, girl from status family, BA (Hons) Delhi, Master in Computers from top Ameircan University working in US at Gaint MNC< holidng Green Card. Please respond with date place time of birth, photograph (returnable) to PO Box. 28295, Bombay-400049, US Fax No. 914 (923) 1664 E-mail mohani@hotmail.com


Matrimonial: Alliance invited for Convent educated, Gursikh girl, MS 29/160, currently working on H1B in MS Computer. E-Mail: parmpreets@yahoo.com


...Grooms



Matrimonial:
Beautiful, smart Professionally Qualified match for handsome Punjabi Arora boy 28/170 M.Sc (mech. Engr.), Canadian Immigrant Businessman. Coming 1st Aug. Early marriage. Caste no bar. Tel: 6497957/6282796 E-mail:cdewan39@yahoo.com. Fax:6498149


Matrimonial: Clean shaven sikh boy 29/180, US citizen,smart, slim, handsome, brilliant, MS (finance) from UCLA (U.S.A.), B. Tech (IIT) Delhi. Working as investment banker, seeks beautiful, slim, elegent, girl from good schools, professionally qualified, with defence services background, boy in Delhi till August end. Father Ex-colonel. Respond with photo and details.e-mail tinasahai@yahoo.com.


Matrimonial: America settled Government employee 38/167 Hindu Arora boy seeks educated, good looking girl, previous short marriage annulled. Contact at E-mail-bharatkhoj@aol.com.

Matrimonial: Graduate, Handsom, Tall, 32/180, Green Card holder belonging to Punjabi Hindu Delhi based family. Looking for Professionally qualified girl preferably working in US. Reply with Biodata and Photograph Email malhotra_mb@yahoo.com


Matrimonial: Brahmin, UP, in London since 1975, Dentist, 33/172 cms., extremely handsome, very fair, NS ND veg., owns properties in London. Girl must be Medico, M.S., M.D., Brahmin strictly vegetarian, fair, Hindi speaking, visiting India in September. Photo must. Mr Sharma, 25, Repton Road, Harrow, Middlesex HA3 9QD U.K.

......Obituaries

10th Day/Rasam Pagri & Uthala With profound grief and sorrow we inform the sad demise of our beloved Sh Madan Lal Kesar of 411, Purani Mandi, who left us for his heavenly abode on Monday the 31st July 2K. 10th Day will be performed on Wednesday the 9th August at 10 AM at Rani Park. Rasam Pagri/Uthala will be performed on Friday the 11th August at 5 PM at Jain School, Rani Talab.


10TH DAY KRIYA With profound grief and sorrow we inform the sad demise of our beloved grand mother Smt. Shobawati Labroo W/o Late Sh. Prem Nath Labroo, mother of Late Sh. Moti Lal Labroo on 5th August 2000 at Prem Cottage, Lane No. 10, near Dewan Devi Public School Rajpura Mangotrian (near Shaktinagar Chowk) Jammu. 10th Day Kriya will be performed on 14.08.2000 at Rajinder Park Canal Road, Jammu at 8 A.M.


10th day Kriya With profound grief and sorrow we inform the sad and untimely demise of Smt. Mohan Rani Raina W/o Late Sh. K. N. Raina (Advocate) R/o Gulshan Nagar Srinagar, at Present 357 Panchi Nagar, Rehari Colony Jammu (near Sharma Medical Shop, on back side of Baby Caterers) on 31.7.2K. Tenth Day Kirya will be performed on 9.8.2K at Rajinder Park, Canal Road Jmu at 8.30 A.M.


10TH DAY/KRIYA PAGRI With profound grief and sorrow we inform the sad demise of our beloved Sh. Harnam Dass (Karlupia) S/o Sh. Bhagat Ram R/o 276, Vikas Lane Talab Tillo, Jammu left his heavenly abode on 1.8.2000. Tenth Day/Rasam Pagri will be performed on 10.8.2000 (Thursday) at their residence. Satsang from 10.30 a.m. to 12.30 noon and Bhog from 1 p.m. to - 4 p.m.


10TH DAY KRIYA With profound grief and sorrow we regret to inform the sad demise of our beloved father Sh. Makhan Lal Bhasin S/o Late Sh.Gopi Chand Bhasin on 02-08-2K of Drabiyar Habba Kadal Srinagar Kashmir, presently H. No. 196/C Sec 1 Durga Nagar Bantalab Jammu. 10th Day Kriya will be performed on Friday i.e. 11th of August 2K Muthi Bridge, near Education Directorate Office at 8 A.M.


TENTH DAY KRIYA With profound grief and sorrow we inform the sad demise of our beloved "Bobji" Sh. Arjan Nath Watel of Manzalvani, Akingam, Anantnag Kashmir at present House No. 23, Sector No. 1 near Samaj Sudhar Trust New Colony Durga Nagar. His 10th Day Kriya will be performed on 17th July 2000, Monday at 8 A.M. at Rajinder Park Canal Road, Jammu.




......Employment


Government of India, Ministry of SSI & ARI,
Small Industries Service Institute, Jammu.
Organises

Enterpreneurship development programme

Duration 1 Month (Sept./Oct 2000)

Eligibility Men/Women who are above 18 years of age & are interested in starting their own Small Scale Industrial Unit or any other business enterprise.

Contents Introduction to Small Scale Industries/Business, Entrepreneurial motivation, Introduction to industrial set up in the State, Procedures for setting up of Small Scale Industrial Unit/Business, Preparation of Project Report, Market survey, Marketing of the product, Salesmanship, Management of Small Scale Industrial Unit/Business etc.

Faculty Officers from SISI, NSIC, SIDBI, DIC, Commercial Banks, NABARD, KVIC, Women Development Corporation, SICOP, Other agencies related with development of industries, some successful entrepreneurs etc.

Place Udhampur (J&K)
Last date Last date for submitting application is 26-08-2000.

How to apply Interested candidates may send their application written on plain paper giving full particulars of their Name Father's Name, Address, Date of Birth, Whether SC/ST/OBC or General, Educational Qualifications, Present Occupation, etc. at the following address :-

Director
Small Industries Service Institute
36 B/C, Gandhi Nagar, Jammu 180004.
Phone : 450035/431077/425435 E-mail
sisijk@jandk.jk.nic.in
davp 8021 (123) 2000

MUSCAT
BAHWAN AUTOMOTIVE CENTRE
An ISO 9002 Company

SALES PROFESSIONALS - AUTOMOBILES

The Sultanate of Oman is among the most progressive nations in the Middle East with a rapid economic growth. Bhawan Automotive Centre is one of the largest business groups in the Sultanate, representing several world renowned franchises like TOYOTA, LEXUS, FORD, M.A.N., KOMATSU, KUBOTA, YOKOHAMA and many more.

We are a professionally managed organisation with over 4000 employees and a nationwide network of 50 branches. We have excellent infrastructure facilities for providing the highest level of sales and after-sales-support to all customers and our sales network is the best in the country.

JOB: Front -line selling of automobiles as Sales Consultants from our modern showrooms located across the country. The job will require direct selling to both individual and corporate clients in a highly competitive environemnt.

QUALIFICATION: Graduates in any discipline.

AGE: Below 25 years. Bachelors only need apply.

EXPERIENCE: 3 to 4 years of hard core field sales, preferably in automobile/consumer durables/industrial products etc. with reputed organistions.

An attractive tax free remuneration will be offered to the selected candidates. Other benefits include annual leave & air passage, gratuity, free medical benefit, bachelor sharing accommodation with mess facilities and company transport.

Applicants willing to join us from a long term perspective may respond within a week long with detailed resume enclosing copies of certificates/passport and 3 recent passport size photographs to:

MANAGER (HRD)

BHAWAN AUTOMOTIVE CENTRE

Post Box - 168, MUSCAT, P.C. - 113, SULTANATE OF OMAN.

or via e-mail to:ssboman@omantel.net.om

TELECOMS PROFESSIONALS
UH/MIDDLE ERST *EXCELLENT PACHAGE

@droll Tech solutions is recruiting for a leading multinational blue-chip mobile telcoms organisation. They require 20-30 AXE 10 Testers/Engineers to work in the UK and throughout the Middle East with excellent career opportunities.

Ideally you will have a working knowledge of the following:

* GSM Operations & Maintenance, MSC, BSC, BYB 501 or BYB 202.

* APZ hardware and APZ software, specially APZ 20.

* Integrating MSC and HLR into line networks RBS.

* As an AXE hardware fester you will be able to integrate and commission BYB 202 extension to live host exchanges as follow.

Groups Switch extensions involving SPM, TSM plus RPs in CME 20 and wireline, Extensions to CME 20 Exchanges involving Optical Disc, announcement machines, Incoming clock modules and TRA.

Please send CVs in First instance with contact phone and email details.

Telephone: 0044 208 202 2674. Fox: 0044 208 203 7768. Email telecom@adroit-tech.com.

Adroit Tech Solutions www.adroit-tech.com

Cyber Gear
THE INTERNET COMPANY
INTERNET/WEB OPPORTUNITIES IN DUBAI

Cyber Gear, a leading Internet company in Dubai is looking for the following to join our team of dedicated web professionals:

WAP Specialist: Should have thorough knowledge of WAP/XML/WMLS/SMS. Ref: WAP/01.

Web Programme: Should have excellent knowledge of JAVA, Javascript, ASP, VB Script, XML, Cold Fusion, HTML, Perl/CGI, MySQL, PHP3. Send URL's of live sites for reference. REF: PROG/01.

Graphic Designer: Excellent knowledge of Photoshop, Illustrator, Flash, Freehand, Dreamweaver, Corel Draw & Fireworks. SEnd URL's of live sites for reference. REF: GRA/01.

Salary/perks will depend on experience. All positions require minimum of 1 year work experience and applicants must hve a valid passport and be willing to relocate to Dubai immediately. Prefer applicants between 22-27 yrs.

All interested applicants must apply IMMEDIATELY and send a complete bio-data with educational qualifications and work experience details to:- hrmgr@cbyer.gear.com.

OVERSEAS
APPLICTIONS ARE INVITED
FOR THE FOLLOWING PROFESSIONALS

EDITOR/TRAVEL WRITER: 1 POST

This position involves writing, editing and managing several areas on our site, focusing on - but not limited to the Travel News and Community areas and more. MA English literate with 3 years experience in similar field.

GRAPHIC DESIGNER: 2 POSTS

This position requies 3-5 years experience in Graphic Design for applications for the internet as well as proven UI design skills. Variety of work and clientele in portfolio is preferred. Excelelnt HTML, Photoshop, Fireworks, Dream Weaver skills required; illustrator and general Office applications; Bachelor's degree in Design, Graphic Design and strong, demonstrable UL Development experience preferred.

MARKETING MANAGER, LEISURE SUPPLIER RELTIONS: 1 POST

The qualified female candidate should have a minimum of 3 years work experience with atleast one year of relevant on line marketing experience. Experience with online commerce and an MBA is required. Experience with the travel industry, especially leisure products, is desirable.

SOFTWARE ENGINEER: 2 POSTS

MCA with 4-5 years experience in object-oriented programming is required. Experience must include: Java, C++, Java Script, JSP, ASP, relations database - MS SQL, XML, XSLT and XSL.

SENIOR USER INTERFACE RESEARCHER (USABILITY) : 2 POSTS

Passion and knowledge for user - centered analysis, and evaluation. Significant experience in usability Engineering and Research on interactive design for the Web. Significant experience in one or more of e-commerce, community (chat, message boards, instant messaging), search and navigation, personal information delivery, on-line magazines, and etc. MCA in Computer Science and B.Sc., in Psychology (Congnitive, Experimental, Human factors) is required.

WEB DEVELOPER: 2 POSTS

MCA and 3+ years experience working on websites and technicl proejcts. Experience with scripting (PERL, Java Script), Windows, NT, DHTML, XML, C, C++ and MS SQL is required.

Interested candidates who meet the minimum requirements as outlined above, please visit http://www.dmcentre.com for details and mail their CV and salary equirements on or before 10th August 2000 to the following address:

Mr Abdulla Yasir, Digital Media Centre Pvt. Ltd.

#02-01 Shuaz Buidling, Orchid Magu, Male, Maldives.
Email"
jobs@vmaldives.com.

N SQUARE CORPORATION (USA)
Softwarse/Hardware Design & Consulting Services

We asre looking for strong candidates in the following areas, to work at our California office, USA.

C++/Java Developer, Server-side programmers with HTML/LXML, CORBA, n-tier architecture, EJB, UML, Win NT/UNIX. Min 2 yrs experience in Java area.

Embedded Software Engr. C/C++, Java, Assembly, Real-time OS (and skill): e.g. VxWorks/PSOS/QNX, VRTX. etc. Telecommunication/Data Communication/Networking background a big plus. Min 2 yrs experience.

ASIC Design/Verification Engr. C, Verilog/VHDL, shell scripting a plus. Tools Synopsys/Altera/Cadence. VERA knowledge a big plus. Min 2 yrs of hands-on experience.

Sales/Marketing Mgr: We are also looking for a sales markting pesons with an overall understanding of internet-based Technologies - E-Commerce, WEb apps, Hardware Engg/Embedded Systems, Telecommunications, ERP etc.

Visit our web site at http://www.nsquare.com for further details. Interested candidates may apply by e-mail at staffing@nsquare.com (preferred) for Fax#1-408-654-0520 or postal mail to: Attn: HR, N Square Corporation, 2100 Walsh Ave. Suite # B-1, Santa Clra, CA 95050, USA.

FIND YOUR SOURCE FOR THE BEST CAREER OPTIONS IN USA & UK

Sysfour Solutions, LLC is a fast growing company providing integrated system solutions, To meet our demand we are looking for the following personnel.

* REAL TIME EMBEDDED DEVELOPERS * WIRELESS DEVELOPERS * ENTERPRISE SOLUTIONS * E. BUSINESS

The successful applicant will have at least 2-3 years experience in a design development & system verification or similar role preferably in Telecommunication or Datacommunications.

Degree in Electronics and Telecommunications or Computer Science preferred.

Skills required include knowledge of building and maintaining a working Lab, ATM, UNIX, TCP-IP, Packet Voice, Transport Technologies, Networking and Network Management. In addition, the successful applicant will have experience in two or more of the following fields: Unix, C,C++, VxWorks,pSOS, Visual C++, Com/D.Com. Oracle Finance

* GSM, GPRS, PMR, WLL, DECT, HSCSD, EDGE * Access Networks, Public Switched Telephony Networks (PSTN), Intelligent Networks (IN), Data/Transport Networks, Telecommunication Management Networks (TMn), * Protocols: CAS/CCS, V5, Q931, DASS2, SS7 (TUP/ISUP), MAP, TCAP, AIN, INAP, CAME BSSMAP *RF- CDMA or TDMA * Automated Testing; * Test Management Systems; * ATM: adaptation layers and appliations over ATM; * Mobile Phone Application Testing; * Verification Test of Routers, VPN's, Wireless IP Access, * Testing TCP/IP: IPSEC, BGP, OSPE, VolP, L2TP<PPP,IPOA, Mobile IP, DiffServe, IntServ, DHCP, RADIUS, DNS; * Network Management; * CORBA, SNMP, (CMIP would be advantageous as well (; * FCAPS Testing (Fault, Configuration, Accounting , Peformance, Security); * Network Management Centre Level Application Testing Incl. Integrated Fault, Configuration Pefroamnces Management; * FTP, TFTP, TELNET, HTTP, HTML; * LMT (Local maintenance Terminal( * OMC Performance testing; * GSM OMC-R, GSM OMC-G Integration, Feature, System Testing; *Automated OMC Testing.

SysFour believes in flair and innovative HR policies and provides employees attractive compensation packages. If you are interested please e-mail your resume to : recruiting@sysfoursolutions.com

or mail to : SysFour Solutions, L.L.C. Suite 203, 3530 Rt. 27, Kendall Park, New Jersey 08824 USA.

APPOINTMENTS

One of the biggest Qatar based business group having ISO 9002 certificate and diversified business interests throughout the Gulf region, is looking for class professionals, who could contribute towards giving a new thrust and direction to the group's growing food business. The group has five different modern plants for Flour, Biscuits, Baby Food and Pasta.

1. IT PROFESSIONALS : MCA with minimum 5 years actual work experience in projects based on Fox pro, Microsoft Access, Visual basic platforms. Knowledge of accounting, payroll, inventory management and Management Information system is a must.

2. LAB INCHARGE-MICROBILOGY : Post graduate in microbiology with 5-7 years experience as Lab In-charge in a large food manufacturing company. He should be capable of running in laboratory independently as its head, and can guide and lead the laboratory staff.

3. PLANT MAINTENANCE ENGINEER : Mechanical/Electrical Engineers having good experience in food industry in day to day and preventive maintenance of plants and machinery. Earlier experience on Buhler AG (state of art) machines will definitely be an advantage.

4. PRODUCTION SUPERVISOR : Having degree/diploma in food process technology with a minimum of 5 years of relevant experience in manufacturing of biscuit/pasta/baby food etc. Should be capable of doing production planning and control over manpower.

5. ASSISTANT MANAGER (ADMINISTRATION ) : MBA or PG Diploma, with 5-7 years of good administrative experience including prepation of pay rolls, maintaining personal files, leave planning, travel arrangements for company employees and other routine administration works in a large manufacturing company. Should be computer literate.

6. ACCOUNTANTS : Chartered Accountants with 5-7 years experience in a large manufacturing company. The key task will be formulating and implmenting strategies and reviewing the accounts, assisting in the planning process through collection of data, risk analysis and review of critical areas. Should have working experience on office/according package.

7. SALES SUPERVISOR : Graduate/Post graduate with 5 years experience in FMCG sales preferably in food industry. Preference will be given to persons with gulf experience and GCC driving license.

We provide an exciting working environment with a decent package and tremendous opportunities for future growth. Interested canddiates may forward their CVs with contact telephon nos and colour photograph within 10 days to :

THE GENERAL MANAGER
P.O. BOX 1444 DOHA-QATAR, FAX : 00974 4438137

AUTOMOBILE SPARE PARTS &
WAREHOUSING/DISTRIBUTION PROFESSIONALS

We are one of the largest business groups in the Sultanate of Oman representing several world renowned franchises like TOYOTA, LEXUS, FORD, M.A.N, KOMATSU, KUBOTA, YOKOHAMA and many more. We are a professionally managed organisation with over 4000 employees and a nationwide network of 50 branches. We have excellent infrastructure for providing the highest level of after-sales-support to all our customers and our Parts & Service network is the best in the country. The Central Parts Warehouse has a mammoth area of 15,000 sq mts, stocks over 150,000 line items and through a fully computerised operation distributes parts and accessories throughout Oman. We need the following personnel.

1. Warehousing, Logistics & Distribution Manager : Job : To ensure logistics planing, receiving/binning/distribution management and achieved highest level of customer/user satisfaction, with efficiency and optimal cost.

Qualification :   A good degree, preferably in Engineering. Additional management qualifications will be an asset.

2. Procurement & Inventory Control Manager- Spare Parts

Job : To handle inventory management functions including material requirement planning, purchasing from Principals, pricing, inventory control, developing new products/sources of supply.

Qualification : Graduates in Science/Engineering preferably with additional management qualification.

3. Sales Manager Spare Parts : job : Promoting sales of automobile spare parts through sales counters, institutional buyers, dealer network and leading a team of sales professionals.

Qualification : Engineering Graduates preferably with management qualifications.

4. Product Executive - Spare Parts : Job : To assist the Inventory Control Manager in pricing, sales analysis & planning, ordering,sales promotion, market research etc.

Qualification : Graduates in Science/Engineering. MBAs preferred.

5. Salesmen-Spare Parts Job : Sale of spare parts of passenger cars, commercial vehicles and/or construction equipment to individual and institutional customers through our modern showrooms located throughout the country.

Qualification : Graduates in any discipline.

COMMON FOR ALL POSITIONS : An attractive tax free remuneration package with a high saving potential will be offered to the selected candidates. Position Nos. 1 to 4 are entitled for fully furnished & company maintained family accommodation, car, utility/soft furnishing allowance and free school transportation for children. For other positions, bachelor sharing accommodation with attached mess facilities and transportation will be provided. Other benefits for all positions include annual leave, air passage, gratuity, comprehensive medical care etc.

Applicants willing to join us from a long term perspective may respond within a week alongwith detailed resume enclosing passport copy and 3 recent passport size photographs to :

MANAGER (HRD)
BAHWAN AUTOMOTIVE CENTRE
Post Box No. 168, MUSCAT, P.C-113, SULTANATE OF OMAN
or via e-mail to :
ssboman@omantel.net.com

JURONG ENGINEERING LTD SINGAPORE

Jurong Engineering Ltd is a listed company in Singapore commanding a major presence in the construction industry in this region, including India.

Vacancies in Engineering Projects

We invite suitably qualified candidate for our projects in South East Asia and Middle East regions. All candidates must possess a Bachelors Degree in Engineering with a minimum of 5 years of relevant working experience. Good interpersonal skills, leadership qualities and ability to adapt to a new working experience. Good interpersonal skills, leadership qualities and ability to adapt to a new working environment are pre-requisites. Potential applicants must be willing to accept overseas job assignments on single status.

Boiler Erection Engineer : Experience in planning, implementing and supervision of boiler installation for industrial/Power Plants. Good knowledge of boiler components, including pressure parts, structure, insulation etc.

Piping Engineer : Experience in planning, implementating and supervision of piping installation for Industrial/Power Plants. Good knowledge of visual inspections on pipe welding work & hydro-test requirements & ASME codes & standards.

Turbine Engineer : Experience in planning, implementing and supervision of turbine installation for industrial/Power Plants. Good knowledge of turbine components and associated auxilaries including piping, valves and instrumentation.

QA/QC Engineer : Faimiliar with preparation of inspection and testing plan, welding procedure specifications and procedure qualification records. Familiar with ISO 9000 requirements.

Planning Engineer : Experience in planning, scheduling and cost control Good knowledge in Primavera and MS Project.

Auxiliary Equipment Engineer : Experience in planning, implementing and supervision of auxilliary equipment installation including pumps, tanks and compressors. Good knowledge of equipment and associated auxilliaries.

Electrical & Instrumentation Engineer : Experience in planning, supervision of installation of electrical panels, MCC, instrument cables and cable trays and conduits. Good knowledge in field calibration and testing of electrical equipment and instruments.

Material Control Engineer : Familiar with computerised material control system for plant equipment and consumables. Good knowledge in material control documentation with exposure to ISO 9001 quality systems.

Power Plant Maintenance Engineer : Good knowledge in parts/components of a boiler and the mechanics associated with them. Ability to plan & co-ordinate maintenance schedules with clients, supervisors and contractors. Proficient in preparing estimates for maintenance jobs.

Petrochemical Plant Maintenance Engineer : Good knowledge in all components in a Petrochem Plant including the maintenance requirements for the equipments. Ability to plan and co-ordinate maintenance schedules with cleients, supervisors and contractors. Proficient in preparing estimates for maintenance jobs.

Estimation Engineer (Mechanical) : Good knowledge in all mechanical components including piping, valves, steel structures, mechanical equipment, insulation, painting etc. Possess the ability to read and understand P&IDs, plant layout for material take-off.

Estimation Engineer (Electrical) : Good knowledge in all electrical equipments such as motors, MCC, panels, cables, cable trays and instruments. Ability to read and understand electrical single line, cable schedules, cable trays and conduit routing drawings.

Interested applicants please send your detailed resume stating your qualifications, career history, contact numbers (tel, fax) and e-mail address (if any) to the following address :

Jurong Engineering Ltd
25 Tanjong Kling Road Singapore 628050
*Tel No. 65-6600352 * Fax No. 65-2684211
*E-mail Address :
kkyeo@jel.com.sg

HOSPITAL SERVICES CONSULTANCY CORPORATION (INDIA) LTD.
Ministry of Health & Family Welfare Government of India

Through Hospital Services Consultancy Corporation (India) Ltd. Plot NO. 6 (A), Block-E, Sector - 1, NOIDA, UP - 201 301, India. International Competitive Bidding Invitation for Bids for the procurement of Pharmaceuticals

Credit No.: ITF-018-IN
Project Name: Reproductive and Child Health Care Project
IFB NO. HSS/Pur/RCH/KIT-A/2000 Date: June 30, 2000.

1. Government of India has received a credit from the Interim Trust Fund administered by the International Development Association in various currencies towads the cost of the Reproductive and Child Health Project and it is intended that part of the proceeds of this credit will be applied to eligible payments under the contract for the supply of Pharmaceuticals for which this invitation for Bids is issued.

2. Hospital services Consultancy Corporation (India) Limited (HSCC) on behalf of Ministry of Health & Family Welfare, Government of India, New Delhi hereby invites sealed bids from primary manufacturers or their authorised representatives from eligible source countries as established by the Interim Trust Fund and as defined in the IBRD Guidelines for Procurement (The countries which are, as of date, inligible are listed in Section VIII of the Bidding Documents) for the supply of Pharmaceuticals - Oral Rehydration Salts, Tablet Iron and Folic Acid (IFA large), Tablet Iron and Folic Acid (IFA Small), Concentrated Viamin A Solution and Tablet Cotrimoxazole (Paediatrics) in prescribed paks nd in loose numbers. These pharmaceuticals have been described and lised in detail in the Schedule of Requirements. A "Primary manufacturer" is defined as a company that performs all the manufacturing and processing operations needed to produce ; pharmaceuticals or vaccines in their appropriate dosage forms, including processing, blending, formulating, filling, packing, labelling and quality testing. Bids may be submitted by an authorised agent for and on behalf of the primary manufacturer provided the bid is accompanied by a duly notarised letter of authority fromthe Primary manufacturer authorising the designated agent to bid solely for and on behalf of the primary manufacturer. Merchant exporters, pre-packers, skippers and traders are not classified as primry manufacturers and bids from them will not be accepted. Documentary evidence willbe required of all bidders that they have qulifications, experience and capacity to be able to successfully complete the contract on time for the pharmaceuticals offered.

3. Interested eligible bidders may obtain further information from the inspect the bidding documents at the address given below:-

Chief General Manager (P&P),

Hospital Services Consultancy Corporation (India) Limited,

Plot No. 6 (A), Block E, Sector 1,

Noida (UP) 201301 India.

Telephone No. 91-11-91-4542436/37/40/43, 91-4533009.

Fax No. 91-11-91-4533001, 4542447.

E-mail: hsccied@nda.vsnl.net.in

Website: http://www.hsccited.com.

4. A complete set of Bidding Documents may be purchased by any interested eligible bidder from 1000 hrs. (IST) to 1300 Hrs. (IST) and from 1430 (IST) to 1630 Hrs. (IST) on all working days between July 17, 2000 on the submission of a written application at the above address and upon payment of non-refundable fee of Indian Rupees 8600/- or US $200 in the form of cash or demand draft in favour of Hospital Services Consultancy Corporation (India) Limited payable at NEW DELHI/NOIDA. India. Bidding documents requested by mail will be despatched by courier on paymnt of an extra amount of Rupees 500/- (for domestic bidders) and US $50 for overseas bidders. HSCC will not be responsible fo the postal delay, if any, in the delivery of the document or non-receipt of the same.

5. All bids must be accompanied by a bid security in the currency of the bid or US dollar or in Indian Rupees equivalent to the Indian Rupees as specified in Section VI - Schedule of Requirements of the bidding document and must be delivered to the address as mentioned in para 4 above on or before 1300 Hrs. (IST) on September 1, 2000. Bids will be opened at 1330 Hrs. (IST) on same day in the presence or bidders or their representatives who choose to attend on the specified date and time at office of HSCC at the address given in para 4 above.

6. In the event of specified date for the submission and opening of bids being declared a holiday for the purchaser's office, the due date for submisison and opening of bids will be following working day at the appointed time.

7. The purchaser will grant a margin of preference to Pharmaceuticals manufactured in India in accordance with the procedure out Lined in the bidding documents.

8. The bidders must quote for the full quantity of the schedule (s).

Chief General Manager (P&P),

Hospital Service Consultancy Corporation (India) Ltd.

HSCC has a vision of quality, innovation &

Excellence in Health Care Consultancy.

Department of Telecommunications J&K Telecommunication Circle
Requires Junior Engineers Civil for Civil Wing

1. Vacancies :

OC - 2 and OBC = 1 Total = 3

(the vacancies are subject to change)

2. Pay Scale : Rs. 5000-150-8000.

3. Age

Not more than 27 years as on 01-07-2000. The candidates belonging to SC/ST/OBC are eligible for relaxation in age limit as prescribed by the Government.

4. Educational Qualifications

Candidates who have obtained minimum Diploma in Civil Engineering after a full time course of three years or its equivalent from a recognised institution/Board or University which has been recognised by Central Government or State Government are eligible for applying to the post of J.E. (Civil).

Selection :

The selection will be made on the basis of the result of the competitive examination to be held by the dapartment as per following time table :

Paper I : Subject : General Engineering (Civil). Day & Date : Sunday, the 17th September, 2000. Time (IST) 10.00 A.M. to 12.00 A.M.

Paper II : Subject : English & General. Day & Date : Sunday, the 17th September, 2000. Time (IST) 2.00 P.M. to 4.00 P.M.

5. Employment Exchange & Validity.

Applicant should have registered him or her self with any Employment Exchange of J&K State and the registration should be valid.

6. Fee

The examination fee will be Rs. 30/- to be paid in the form of I.P.O. drawn in favour of Accounts Officer (Cash) O/O CGMT J&K Circle Jammu. There will be no fee for SC/ST candidates.

7. Last date of receipt of Applications

Applications complete in all respects should be sent to so as to reach the office of Chief General Manager Telecom J&K Circle Telephone Exchange Building Jammu Tawi 180001 on or before 31-07-2000.

8. Application form.

Proforma of the application form can be had from the receptionist of the Telephone Exchange Building Jammu/Srinagar and in the office of Telecom District Manager Udhampur, Telecom District Engineer Rajouri and Area Director Telecom Leh (Ladakh).

Incomplete applications and applications received after due date will be rejected.

Sd/-
S. Sivaprakasam
Dy. General Manager Telecom (Admn)
J&K Circle Jammu Tawi.

Oman Trading Establishment Muscat

OTE Group is a young and fast growing Organisation and is the second largest automobile distributor in the Sultanate of Oman. OTE represents leading manufacturers such as General Motors (Cadillac & Chevrolet), Hyundai, Subaru, Isuzu, KIA and Ssangyong exclusively in Oman. Similarly in Consumer Electronics & Home Appliances, the franchises include White Westinghouse and LG Electronics.

The Group has its Head Office at Muscat and has a wide network throughout the country operating through 7 Showrooms, 17 Branches and 15 Service Centres. The Group is now looking for outstanding professionals to assume the following responsibilities:

Franchise Head - Vehicles The Job:

To independently handle a franchise operation looking after both retail and fleet/institutional sales of the franchise concerned, with focus on increasing market share in a fiercely competitive environment. It would include product promotion and events and forecasting of requirements based on customer trends. The job would be supportted by the Commercial and Advertiising Departmnts of the Group. The position reports to the General Manager.

The Person

Engineers with MBA from reputed institutions. Experience of round 8-10 years of direct selling. Current position should be at least that of a Regional Head of an organistion at a national leel. Excellent communication, a passion for direct selling and retailing, ability to work with and motivate a team of equally ambitious sales professionals. Age 30 - 34 years.

Senior Products Executives:

The Job: To position the brand/service in one of the most competitive markets in the wold with competition from all the global players. Key responsibilities would include competitive analysis and strategy formulation. It would extend to market development/sales promotion activities in association with the Sales and Advertising teams. The position reports to the Franchise/Service Head.

The person: Engineers with MBA from reputed institutions with around 4 - 5 years' experience with a large automobile manufacturer or a dealer preferred. Candidate should possess strong inter-personal and analytical abilities. Preferred 26 - 29 years.

Added to the best quality of life in Oman, the Company offers an attractive tax-free salary with furnished accommodation, car under Company's scheme, air passage, annual leave, free medical facilities, gratuity, etc. Interested candidates with a long term career perspective, meeting the above criteria should apply with a recent passport size photograph within 7 days to:-

Group Manager - HR & A, P.O. Box 175, Postal Code 117, Sultanate of Oman.

Or E-mail their appliction to people@omantel.net.om.

Engineers

Marconi Communictions is aggressively pursuing our goal of being the fastest-growing broadband communications company in the world. With networking as our core business focus, we have created many best-in-class products for the enterprise nd service provider markets that enable our clients to build and manage Networks of Steel. Opportunities are available for individuals with strong skills in the area listed. Positions are located at the Pittsburgh, Pennsylvania headquarters and other locations in the United States.

Software Development Engineer

Senior Development Engineers

Lead Development Engineers

Principal Engineers.

Requirements: 3+ years experience, proficient in C,C++.

Area of expertise in one or more of the following: ATM, IP, MPLS, PoS, VxWorks, OS, Firmware, Ethernet, LAN/WAN Drives, diagnostics.

Software Test Engineers

Senior Test Engineers

Lead Test Engineers

Requirements: 3++ years experience in testing protocol or networking products or Test Autonomation.

Area of expertise in one or more of the following: LAN/WAN Testing, ATM, MPLS, PoS, IP, EAST, Routing, Physical Layer Testing, TCL/TK/Java (for test automation)

Hardware Development Engineers

Board Designs Engineers: 3+ years experience in the specification, designs and simulation of Large PC Board, containing high-speed digital logic, amnalog circuits and EPG's

ASIC Designs Engineers: 3+ years experience in HDL programming Language (VHDL preferred) and EPGA or ASIC Desgin.

Marconi Communication will provide visa sponsorship. Interviews will be conducted in India. Only qualified candidates for the positions described in this advertisement will be considered. Please submit your CV within wo weeks of the advertisement run date. CVs submitted electronically are preferred. Submit to: Marconi Communications, Engineering Recruiting, 1000 Fore Drive, Warrendale, PA 15086 USA, E-mail: indiaresumes@marconi.com Please indicate source code: ADTO1600SM.

Submit your scannable CV using 12 pt. type with minimal use of bullets, lines and underlining. Place your name, phone and mail contact at the top, including street address and e-mail. Include your resume in the body of the e-mail, not as an attachment.

We are an equal opportunity employer with a corporate commitment to diversity. www.marconi.com

This could be your finest hour.

http://www.imajet.com
R&D Engineers - Network Programming

imajet.com.Inc. is a pre-IPO company with offices in California and Singapore. imajet.com has developed breakthrough patent pending technology that is set to revolutionize video communications over broadband Internet. imajet's applications are currently being tested in leading broadband networks in US and Asia Pacific.

The company is presently hiring experienced network programmers to join its R&D in Singapore. Successful candidates will work on developing video over IP applications for next generation devices (such as PDAs, Play Stations, Mobile devices, etc.) over next generation networks (ADSL, wireless, cable, etc.)

Candidates should have:

* At least 3 years of relevant experience

* Excellent C/C++ programming skills demonstrated by extensive development in UNIX and Windows environment.

* Experience in developing data streaming applications over IP networks would be advantageous.

*An eagerness and desire to learn and master emerging technologies.

* Good communications skills: both written and oral (English), and ability to adapt to a multicultural working environment.

* Must be a team player, and capable of multiasking.

The company offers attractive remuneration package plus stock options, including other benefits. If you wnat to be part of our dynamic team, please send in your resume with full details of your background, experience and career objectives with current and expected salary to:- recruitment@imajet.com

Or
FaxL +(65) 778-5238. (Only short-listed candidates will be notified).

.....Miscellaneous


MAHANT BACHITTER SINGH COLLEGE OF
ENGINEERING & TECHNOLOGY
BABLIANA, JAMMU-10
H.O. Digiana Ashram, Jammu — 180010-J&K
(A MINORITY INSTITUTION)
(APPROVED BY J&K GOVT., AICTE & AFFILIATED TO UNIVERSITY OF JAMMU)
ADMISSION NOTICE FOR MINORITY QUOTA SEATS
SESSION 2000-2001

Applications are invited on prescribed form from Sikh Minority students of Jammu and Kashmir including those settled elsewhere for admission to Degree level courses in (1) INFORMATION TECHNOLOGY (2) ELECTRONICS AND COMMUNICATION (3) MECHANICAL ENGG. AND (4) ELECTRICAL ENGG. and two additional courses (subject to AICTE approval): COMPUTER ENGG. & B. ARCH. for the Session 2000-2001, against fifty percent of total 240 seats sanctioned by AICTE.

Non-Sikh candidates may also apply who may be admitted against any vacancies caused by non-joining of candidates nominated by the Competent Authority for the other fifty percent of total seats or of Minority students as selected by the Management.

Five Percent of total seats are reserved for NRI candidates from any community who satisfy conditions of eligibility. They should also apply on prescribed forms.

Students who have passed 10+2 examination with PHYSICS, CHEMISTRY AND MATHEMATICS as their subjects securing 50% marks in the aggregate are eligible to apply.

Admissions for the Minority Quota seats (except NRI) shall be made on the basis of ACADEMIC MERIT obtained by the candidates at 10+2 level in P.C.M. (PHYSICS, CHEMISTRY and MATHEMATICS).

Information Brochure containing prescribed application form may be obtained from the Head Office or from College Campus from 03-07-2000 to 22-07-2000 on payment of Rs 500/- through Bank Draft payable at Jammu in favour of "M.B.S. COLLEGE OF ENGINEERING & TECHNOLOGY, JAMMU". Outstation candidates may obtain the same from H.O. by post by sending Bank Draft of Rs 550/-.

Application completed in all respects in accordance with the details given in Information Brochure MUST REACH THE COLLEGE LATEST by 5.00 P.M. on 31st -07-2000.

Sd/-
( Rangil Singh )
Chairman, Managing Committee
M.B.S.C.E.T.


University of Sussex

4 Year Bachelor of Engineering Degree programme withthe first foundation year in India and the subsequent 3 years specialisation at U. K.

Sussex is a top ranked research Univerity in UK with an international reputation and students from over 100 countries. It is ranked amongst the Top 10 universities in the Government's Research Assessment Exercise rating of U. K.

Branch: Computer Systems, Electrical, Electronics & Communications, Mechanical, Mechatronics, Informations Technology, Multimedia, Robotics, Automotive.

Criteria: Good performance in Std. XII Science subjects and personal interviews. www.sussexindia.com.

THE UNIVERSITY OF ADELAIDE

HAVE YOU CONSIDERED STUDYING UNDERGRADUATE MEDICINE OR DENTISTRY AT THE UNIVERSITY OF ADELAIDE, AUSTRALIA IN THE YEAR 2001? Sudents who wish to seek admission to Medicine or Dentistry at the University of Adelaide should not miss this opportuntiy have an interview with the University's selection team. To arrange an interviw or to find our more informtion, please cotact the relevant of IDP Education Australia Office or Dr. Deborah Turnbull at the number listed below. The session is a must for all those considering medicine or dentistry at the Univeristy of Adeliade. Parents and family members most welcome. For further information contact: Faculty of Health Sciences The Univeristy of Adelaide, North Terrace, Adeliade SA 5005 Australia Telphone: (618) 8303, 4859, Facsimile: (618) 8303 3788 Email: admissions.health@adelaide.edu.au.

N.R.I. INSTITUTE

(A PLACE OF KNOWLEDGE WHICH IS SUPREME) (Affiliated to Bangalore University & Recognised by Govt. of Karnataka) (Approved by AICTE) #.6. Papareddypalya, Nagarabhavi II Stage, Bangalore - 560 072 Phone : 3215023, 3210044 Fax : 080 - 3484591 E-mail : nri_institute@usa.net COURSES OFFERED (3 years Degree Courses)
BACHELOR OF HOTEL MANAGEMENT (BHM)
BACHELOR OF BUSINESS MANAGEMENT (BBM)
MICROBIOLOGY (B.Sc.)
Computer Science (B.Sc.)
* FASHION DESIGN & APPERAL (BSc.)
* BACHELOR OF COMPUTER APPLICATION (BCA)

* Approval awaited.
Eligibility : PUC/ 10+2/ 12th Std. pass from any recognised Board. Down load free information, Application and online admission, visit our Website: www.nriinstitute.com For prospectus and application send Rs. 350/- DD to NRI Institute, Bangalore. LAST DATE FOR ADMISSION JULY 15th 2000. Modern Separate Hostal Facilities Available for Boys & Girls

Beat the heat of Summer:

Buy any Maruti & Stay at Broadway Hotel, Srinagar for Four Days & Three Nights (Couple) janki motors ltd (Authorised Dealer of Maruti Udyog Ltd.) B.C. Road, Jammu. Tele: 544437, 548527, 541039 Visit us at www.indiacar.com/jankimotors e-mail:janki@nde.vsnl.net.in. * Including to & fro air travel. *Conditions apply.

Study in USA Hawaii Pacific University: University Higlights: *Issuance of 1-20 for F-1 student vis for selected candidates within a short period of time. * 8,500 students from all 50 US states and 101 countries. * Choice of over 50 undergraduate majors, including International Business, Computer Science, and Travel Industry Management. * Master's programs, including MBA and MS in Information Systems. * Undergraduate and graduate nursing programs. * One-year MBA for senior executives. * Part-time work available after 9 months of study. * Optional 1-year working permit after graduation. * Tuition fee is less than one-half the US national average. HPU Entry Requirements: *Bachelor's Degree: High School diploma or international equivalent. * Master's Degree: Bachelor's Degree or equivalent from arecognized university. Admission is Free ! Everyone is welcome! For further information, please contact us as follows: hawaii pacific university E-mail:International@hpu.edu. Home pageLhttp/www.hpu.edu.

You are 10+2 still Study*and EARN IN AUSTRALIA:
VIIT is one of the premier IT educational institution of offering professional information technology courses to the national & international students. VIIT is a registered training organisation with the Office of Training and Futher Education (OTEF) in Victoria.
Enrol in any of VIIT's IT Diploma Courses & Get FREE training in MCP, MCSE, training in MCP, MCSE, MCSD, CCNA etc. Vendor certification courses offered by VIIT at Melbourne.
Eligibility Criteria:
1. Who have completed 10+2
2. English Language skills: You should meet IELTS Level 5.5-6.0 or TOEFL Level 600.
Courses offered: (Limited Vacancies)
ICA/VIIT 50199 Diploma of Information Technology (Systems Administration) 2 yrs/72 weeks.
ICA/VIIT 50299 Diploma of Information Technology (Software Development) 2 yrs/72 weeks.
ICA/VIIT 50399 Diploma of Information Technology (Business Analysis) 2 yrs/72 weeks.
ICA/VIIT 50499 Diploma of Information Technology (Network Engineering) 2 yrs/72 weeks.
The above courses are nationally recognised and accredited courses. These courses are also best suitable for students who have completed Bachelor's and Master's in Computers and are aspiring for international IT career. Date of Commencement:  First Batch- 28th August, 2000. Last Date for Receipt of Application: 5th June, 2000. VIIT will recognise a trainee's existing competence against the learning outcomes or competencies listed in a course under Recognition of Prior Learning (RPL). For prospectus and application for enrolment please apply to: Director, VIIT, Suite 4, Level 2, 424, St. Kilda Road, Melbourne, Victoria-3004, Australia. Fax: (+61) 3 9866 7611, E-mail:
info@viit.org
*You are eligible to work 20 hrs. per week during semester and full time during vacation after obtaining work permits from Dept. of Immigration MUlti Cultural Affairs (DIMA). *VIIT is an educational body and does not guarantee employment.

....Tender


NAVAL SCIENCE AND TECHNOLOGICAL
LAB GLOBAL TENDER

Sealed Global Tenders are invited by Director, Naval Science and Technological Laboratory, Visakhapatnam- 530027, Andhra Pradesh, India, on behalf of the President of India Direct from reputed India or Foreign Firms for the supply of the following :

1. TENDER NO: NSTL/MD/FE/BU-SNV/2000-2001/01/01

Description of the Item :
Electro Dynamic Exicter System: Qty. 1 No. (8Tonne, Force)

Brief Specifications :

a) i) Pay Load: 700 Kg ii) Force: 80 Kn (Sine & Random), 160 KN (Shock). iii) Maximum acceleration 10 g. (Full load) vi) Maximum Dislacement 38 mm- (p-p) v) Frequency Range: 5Hz- 2.5 KHz. b) Head Expander (to support: 600 x 600 mm. (minimum) upto 2000 Kg Pay load) c) Slip table with change of 1200 x 1200 x 37.5 mm (minimum) Orientation arrangement. d) Windows based Vibration Controller with Pentium Processor. e) Software for Sine, Random and shock cont.

II. TENDER NO : NSTL/MD/FE/BU-SNV/2000-2001/0T/02

Description of the item : Shock Test Machine: Qty. 1 No. Brief Specifications: a) Maximum test specimen weight: 1 Ton. b) Table size: 1500 mm x 1500 mm. c) Maximum vertical accleration at (i) 400 Kg Specimen 600 g (ii) 1000 Kg Specimen: 240 g.

d) The machine shall have povision to produce the following type of shock pulse wave forms.

i) Half Sine Wave, (ii) SAW-Tooth Wave, (iii) Square Wave. e) Durtation of the shock pulse wave from: 2 msec to 60 msec the duration and shape of the waveform shall be programmable by suitable methods such as Pneumatic programmers, Elastomer kits or lead cones etc. f) The machine shall have Microprocessor controlled firing system with safety interlocks and Data Acquisition System compatible to IBMPC g) The machine should be Hydraulically operated with Nitrogen actuated breaking system with safety interlocks to enable smooth operation and avoid multiple shocks. h) The machine should be floor mount type without requiring any special type of foundation.

III. TENDER NO: NSTL/MD/FE/175-NM/2000-2001/01/03

Description of the item : Signal Analyser with Internal Signal Source of Built-in-Printer: Qty. 1 No. Brief Specifications : a) Number of channels: 2 (Two) b) Frequency bandwidth: 10 mHz to 100kHz or more c) Real time bandwidth: 10mHz to 25 kHz or more d) Frequency resolution: 800 lines or more e) Signal analysis: Octave and FFT with special functions. f) Internal signal source: i) Number of channels: One or two ii) O/P wave from Sine, random noise, arbitary wave form etc. I) Indian Firms should quote in Indian Rupees only. The quoted price must be exclusive of all dties and taxes. 2) the requirement is time bound and hence the Foreign Firms, who would be able to obtain export license quickly from their Government need to be particiapted in this tender.

3) Intended tenderers may send three separate Demand Drafts for Rs 500/- of each for Tender No; I & Tender No. 2 and Rs 100/- for Tender No. 3 (or equivalent amount in the respective Foreign Currency) Drawn in favour of Director, NSTL, Visakhapatnam, payable at State Bank of India, Maharanipeta Branch, Visakhapatnam for Supply of Tender documents containing detailed specifications with terms and conditions.

Last date for issue of tenders : By post 24-7-2000, In person: 31-7-2000 Last date for Submission of Tender : 01-08-2000 upto 14-30 hours.

(Dr S V Raman),
Additional /Director, For Director.
7160(69) 2000

INDIAN OIL
(Refineries Division) MATHURA REFINERY, MATHURA - 281005 INDIA NOTICE INVITING GLOBAL TENDER
Sealed Tenders in prescribed tender form under Two Bid System from manufacturers of repute only are invited for:-

1. Precharged Nitrogen Storage Blader Accumulator alongwith connecting accessories for lubricating oil Header of main Blower of FCCU of 50 Ltrs. (Approx.) capacity - Qty: 04 Nos. 2. Precharged Nitrogen storage Bladder Accumulator alongiwth connecting accessories for: (a) Governing Oil System of Wet Gas Compressor -Qty. 02 Nos. Both of 50 Ltrs. (Approx.) Capacity. Cost of Tender Documents: US$ 11.00/- Rs. 500.00 Earnest Money Deposit: US$445.00/ Rs. 20,000.00, Both payable by Demand Draft only. Starting Date & Time for Sale of Tender Documents from (10.00 Hrs. (IST): 01.06.2000 Last Date & Time for Sale of Tender: 16.06.2000 Documnts upto 17.00 Hrs. (IST) Last Date & Time for Receipt of Tenders upto 14.00 Hrs. (IST): 07.07.2000 Opening of Unpriced Bids only at 15.00 Hrs. (IST): 07.07.2000.

General Requirements:

I. Non-transferable tender documents contianing detailed specifications, terms and conditions can be had on any working day from the Sr. Materials Manager's Office, India Oil Corporation Ltd., Mathura Refinery, Mathura - 281005 (UP) India, onpayment of tender fee as mentioned above (non-returnable) by way of Demand Draft in favour of Senior Accounts Officer, Indian Oil Corporation Limited (Refineries Division) payable at State Bank of India, Mathura Refinery Project Branch (3540), Mathura. II. Accredited Indian agents/representatives of Foreign principals can also buy tender documents on behalf of their foreign principals by making payment as specified, alongwith authorisation letter and credentials from principals, alongwith authorisation letter and credentials from principals. However, Bids should be submitted by their principals, on their letter heads and tender fee in US Dollars directly to us. Tender fee submitted by Indian representatives shallbe refunded after receipt of Tender fee in US Dollars.

III. Foreign vendors having Liaison offices in India and seeking Tender documents, must be registered with Reserve Bank of India and must submit a copy of currently valid registration certificate alongwith the request for tender documents as above, failing which tender documents will not be issued. IV. Requests for Tender Documents must be accompanied by documentary evidence of credentials, viz, order copies for similar items, performance certificate from buyers, capacity of plant, yearly turnover etc., in the absence of this requests may not be acceded to V. The UNPRICED Bids must accompany the earnest money deposit in the form of Demand Draft in favour of and in the manner as indicated at Sl. NO. 1 above. Bids submitted without required EMD will be summarily rejected. Cross reference to any earnest money deposited against any other tender documents will not be considered and offer will be treatedas without earnest money deposit. VI. Intending Tenderers/their representatives may witness the tender opening on date & time as mentioned above, with proper authorisation letters from their principals. VII. Tenders received after the prescribed Date & Time & without EMD shall be summarily rejected. VIII. Indian Oil Corporation Ltd., Reserves the right not to isuse Tender documents, or to accept or reject any Tender in Part of full without assigning any reason whatsoever, including those received after due date & time. Indian Oil Corporation Ltd., also reserveds its right not be responsible for any postal delay, loss or non-reeipt of any tender documents. IX. Indian Oil Corporation Ltds., also reserves it's right to extend/Not to extend any of the dates & periods as specified above ast it's sole discretion.

Sr. Materials Manager.


.



Government of Jammu and Kashmir
Office of The Dy. Director State Motor Garages Deptt. Jammu.

Tender Notice

The department of State Motor Garages Jammu requires a Canteen for its employees to provide them tea and other bakery items within its premises. The tenders are invited from the interested dealers for following items :-

1. Rate per cup tea.

2. Rate per piece Kachori

The lowest tenderer shall have to pay the Canteen room rent in the State Motor Garages which will be fixed by the department in consultation with the Estates department.

The tenders should reach this office by or before 01-7-2000.

Sd/-
Deputy Director (Garages)
Jammu.
DIP/J-587

 

)

 

 

| home | state | national | business | editorial | advertisement | sports |
|
international | weather | mailbag | suggestions | archive | search | subscribe | send mail |